10 Steps and Secrets on How To Make Your Own Knife Sheath Like a Pro

10 Steps and Secrets on How To Make Your Own Knife Sheath Like a Pro

Depending on the knife and the function it is used for, making a knife sheath can be different.

Whoever has a knife needs to protect it. Just like an unprotected gun is the site of countless dangers, an unprotected knife too, is a weapon in the hands of the trespasser. If you are worried that your knife will be handled wrongly by the members of your household when stumbled upon, you need an adequate sheath to conceal and secure it at all times!

On the other hand, if storage of the knife is not a compulsion and you merely want to secure your knife for durability, making a knife sheath can keep your knife safe and sound at an efficient budget.

A knife sheath protects the knife as well as its wearer.

how-to-make-a-knife-sheathIf you want to save your time, then this quick information can be very useful. But if you want to investigate more, we have more details in this article, or even in other full reviews. Okay, let’s take a look!

Top luxury knife sheath: Spec-Ops Brand Knife Sheath, of course, it is high price.

The cheap knife sheath: Ka-Bar Leather Sheath

Top luxury knife with sheath: Fallkniven knife, check our review here

The cheap knife with sheath: Condor Knife with Leather Sheath

How to Make a Knife Sheath in Uber-Easy Ten Steps

  • Measure and Draw the Layout

Keep your Gun on a piece of paper and trace both sides of the layout of the knife on the paper.

  • Cut the paper Pattern Layout

Carefully cut the pattern you draw on the paper, leaving enough space around the edges. Fold the pattern over the knife to amend and verify the accuracy of your pattern.

  • Shift Paper pattern to Leather

Carefully cut the identical dimensions of the paper pattern, onto the rough or rugged side of the Leather.

  • Cover the Knife

Wrap plastic around your knife, and insert it into the sheath tightly, to make a raised projection of the knife on the leather.

  • Blank and Wet the Sheath

Get a container filled with hot water and place your cutout leather in it. Soaking in the hot water for 3-5 minutes is sufficient to blank and wet it.

  • Befitting the Sheath

Now place your knife enwrapped in plastic, inside the sheath and close it tight by using clips at the edges. Cross-check every 30 minutes for a span of 12-24 hours or keep as long as it takes the leather to dry and mould to the shape of the knife.

  • Trim and Round off the edges

Trim off the rough edges of your sheath after removing the conformed knife inside the sheath. As the leather is water-hardened you will need a sharp rotary cutter to neatly round off the edges.

  • Mark and Drill the Stitch Holes (if sewing by hand)

With 6 holes in every inch of space, mark your line of sewing and holes you aspire to punch after in an accurate alignment.

If you wish to add the belt loop, this is the time to sew it together.

  • Stitch and Sew
  • Using double-needle or single needle technique, sew the seams of the leather together, beginning at the top. Reverse stitch through the same drilled holes, when done on one side, in order to tighten your stitch.
  • Smoothen the Edges with Sandpaper
  • Burnishing the sheath of your knife should be completed solely by polishing the edges with sandpaper. To acquire a better idea of how fitting your DIY knife sheath is, insert your knife into the sheath and re-check before and after polishing.

When do you need it?

Knife sheaths are used to store the knife safely without getting mold or natural wear on it. Depending on whether your knife will be stored in the attic or under the sunlight, you need specific raw materials that can protect and keep your knife unharmed.

Whoever uses a knife needs a knife sheath to protect the weapon from injuring yourself against the sharp blade. When carrying a knife, you must always use a sheath to mandatorily cover the knife. A good sheath covers the sharp blade against your skin and conceals it from the eye of the attacker, when in need!

Challenges Faced when Making a Knife Sheath

For sharper knives to swords, the durability is dependent on the sheath used to cover it. When making yourself a knife sheath, you must be aware of the following parameters

  • Drafting Measurements

It is okay to be liberal with your measurements as long as you don’t cut off too much sheath during drafting as more is better. Always take care to trim off and take second-hand accurate measurements before drilling or stitching.

  • Altering the Pouch

It is not recommended to re-puncture a knife sheath as it ruins the sheath. To avoid this, make sure you double or triple check your markings prior to punching holes or sewing.

  • Storage and use

To increase the efficiency of protection that the sheath provides, use a welt in between the seams. This thickens the sheath and protects it from the natural wear and tear.

Tips to Choose the Right way to make a Knife Sheath

how-to-make-knife-sheath-like-a-proYou can make knife sheath from varied raw materials; however, the basic construction remains the same, namely, MeasureDraftCutDyeSewPolish. The hack is to use the right material fitting the style and dimensions of your knife as well as for the right function and storage it is subjected to.

  • Pattern Cutting

Your draft pattern should cover Half the Knife, physically, but must be doubled to create a wholesome sheath for the weapon. As the sheath is hardened in hot water, more pressure is required to cut, drill, stitch and sew.

  • Style of Construction

There are many knife sheaths to choose from when self-constructing your knife sheath. The most popular type is the pouch type, which can be made in simple ten steps, as aforementioned. You can even stamp the sheath later onto increase its artistic value.  Pouch type construction covers half the handle of the knife.

  • Water Resistance

Dipping your finished sheath in neatsfoot oil is apt for increasing its resistance against water damages. Keeping your leather protected against the natural damages due to water increases its durability as well as portability.

  • Polishing and Finishing up

Untrimmed edges can cause friction when using it as well as storing it. After trimming the edges of your finished pouch, also take care to polish it with sandpaper for increasing its lifespan.

  • Leather Choice

The leather for the knife sheath is vegetable tanned shoulders for efficient and effortless working.  The wet formed leather is ideal for stamp engravings or designs as well.

Click Here to Leave a Comment Below 0 comments